The Secret to Stopping a Running Toilet

You might think that all you have to do to stop a running toilet is to go and jiggle the handle. This usually seems to work, but not always. Even when it does, nobody should have to do that every time someone uses their bathroom. Not only is it really annoying, but it wastes a lot of water. Fixing this problem will take a little more work, but most of the time it’s not nearly as hard as you’d think it would be.

Why Toilets Run

The handle of your toilet is connected by a chain to a stopper in the toilet’s tank. When you flush, the chain pulls up on the stopper to drain the water into the bowl. A water valve then opens to fill the tank back up. Once it reaches a certain water level, a rod attached to a float closes the valve and stops the toilet from running.

A running toilet is usually caused by a bad stopper or a valve that won’t close properly. If the problem is the stopper, jarring it back into place so that it makes a tight seal might fix the problem. This is why jiggling the handle often stops a running toilet. If jiggling the handle doesn’t work, you may have to look into the tank itself to fix the problem. In some cases, the chain that connects the stopper to the handle is twisted or disconnected altogether. Simply untwist or reconnect the chain to fix the problem. If the stopper itself is worn away or too damaged to create a tight seal, it will need to be replaced. A new stopper can be purchased from most hardware stores.

If your stopper and handle are working properly and you still have a running toilet, the problem is most likely with the fill valve and the float. The float is a hollow plastic ball that floats on the surface of the water in your tank. It’s attached by a metal rod to the fill valve and will close the valve once it reaches a certain height. If it cannot reach this height, it won’t close the valve and stop your toilet from running. This problem can usually be fixed by bending the metal rod so that the float sits higher in the bowl. Be careful not to set the float too high, otherwise it won’t be able to close the valve at all.

MisterSewer---CTA---May-2015-Whitepaper-(720-x-300)(1)

Know When to Contact Plumbing Repair Services

These simple tricks will usually stop your toilet from running, but there might be a bigger problem if they don’t work. If you can’t stop your toilet from running or you just aren’t comfortable trying to fix the problem yourself, there are plenty of Pittsburgh plumbers and Brentwood plumbers who can help you.

Whether you’re battling toilet runs that never stop or clogged pipes that won’t budge, contact the professional Pittsburgh plumbers at Mister Sewer. Our team has over 25 years of experience fixing sewers and pipes all across the Pittsburgh area, making us the city’s experts for any home plumbing repair. No matter what plumbing problem you find yourself up against, let the professionals at Mister Sewer take care of all your drain, sewer and plumbing repair needs. No matter what plumbing problems you find yourself up against, let the professionals at Mister Sewer take care of all your drain, sewer and plumbing repair needs.

Leave a Reply

Your email address will not be published. Required fields are marked *