Handling Hot Water Heater Problems

There are a few easy tips and tricks that all home owners should learn in order to keep their hot water heater working at its best. The preventative measures below will help you to avoid costly repairs and replacements, and will reduce the likelihood of time without hot water. Learn to do what you can yourself, and turn to professional plumbing services in Pittsburgh for the more complex repairs and maintenance.

Check the Temperature Setting

Overheating is a fairly common concern with hot water heaters, so it is important to check the temperature setting. Setting the temperature between 115 and 120 degrees Fahrenheit not only eliminates the worry of overheating, but can also improve your home’s energy efficiency.

Test the T&P Valve

If the temperature and pressure (T&P) relieve valve isn’t working properly, it can lead to costly repairs. Check to ensure the valve is working every 4 to 6 months, so that you can identify a problem sooner rather than later. To do this, life the lever up half way, and allow it to return to its original position. The valve should snap back rapidly, followed by a gurgling sound as some water is released into the drain tube. If this does not occur, then it is time to seek out professional plumbing services in Pittsburgh.

Check for Leaks

Another thing you want to do every 4 to 6 months is a quick visual inspection to see if there are any leaks. You should also check your plumbing and hot water heater if you notice pooling water, damp walls, or a drastic increase in your water bill – especially if you are not able to find, or repair the leak yourself. Make sure you know where your water shutoff valve is located to help keep damage and cost to a minimum.

Flush the Tank

As a homeowner you can perform a mini flush of your tank every 4 to 6 months. This will help to remove sediment on the bottom of the tank. This sediment often leads to rust, corrosion and overall inefficiency. Simply place a bucket under the drain valve, and turn it counter-clockwise. Drain out 3 or 4 gallons of water, then tighten the valve. Your tank should also be fully drained on occasion, which can be performed by your plumber during your routine maintenance check.


Annual Maintenance Visit

Depending on the age of your hot water heater, as well as the hot water usage in your home – the frequency of preventive maintenance will vary. In most cases, once a year is sufficient. During preventative maintenance your Pittsburgh plumber will make sure that all parts are working properly, and that any areas of opportunity are caught sooner rather than later. They will also give you a heads up for anything you should be keeping an eye out for, how to improve overall efficiency and when to schedule your next maintenance visit.

The preventative tips above are the best way to keep hot water heater repairs to a minimum. Schedule your routine repairs and maintenance check and contact the Pittsburgh plumbing pros at Mister Sewer. For over 25 years, our expert plumbers have helped hundreds of homeowners throughout the Pittsburgh area deal with all their pipe’s problems. Discover all the ways we can help keep your home’s plumbing I ship shape and call Mister Sewer today!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.